Fine-finish surfaces
Liquid primer with fine grains for application underneath fine clay topcoat plaster and YOSIMA clay design plaster. YELLOW provides fine-grained grip, reduces and compensates the absorbency and protects plasterboard and other panelling against moisture from the clay plaster application.
Composition
Deep penetrating primer and stabiliser: Water, potassium water glass, dispersion, additives < 1%.
Primers: water, calcium carbonat, water glass, clay, dispersion < 5% (improvement of adhesion properties and application safety) methyl cellulose, xanthan.
Deep penetrating primer and stabiliser: Water, potassium water glass, dispersion, additives < 1%.
Primers: water, calcium carbonat, water glass, clay, dispersion < 5% (improvement of adhesion properties and application safety) methyl cellulose, xanthan.
Supply forms, coverage
10 l bucket, 24 buckets/pallet, liquid, for approx. 50 m2 . Item No. 13.420 5 l bucket, 56 buckets/pallet, liquid, for approx. 25 m2.
10 l bucket, 24 buckets/pallet, liquid, for approx. 50 m2 . Item No. 13.420 5 l bucket, 56 buckets/pallet, liquid, for approx. 25 m2.
Storage
Storage in closed containers is possible dry and cool (frost-free!) for at least one year. Tightly close opened containers again.
Storage in closed containers is possible dry and cool (frost-free!) for at least one year. Tightly close opened containers again.
Preparation
As a rule, agitate undiluted thoroughly. Water addition of up to 25% is possible when strengthening clay plaster surfaces on deep penetrating primer and stabiliser. For primers always up to 5%.
As a rule, agitate undiluted thoroughly. Water addition of up to 25% is possible when strengthening clay plaster surfaces on deep penetrating primer and stabiliser. For primers always up to 5%.
Processing
Application is done with a short pile roller (RED with a foam roller) or with a brush.
Application is done with a short pile roller (RED with a foam roller) or with a brush.
Drying
A subsequent application is only possible after complete drying, at the earliest after 48 hours. Drying depends on temperature and humidity.
A subsequent application is only possible after complete drying, at the earliest after 48 hours. Drying depends on temperature and humidity.