Clay drybuilding
Drywall board made of clay for cladding of wood and metal post structures of inner walls, facing shells, ceiling and roof surfaces. The clay building board brings lots of clay into the house, with all the positive effects for the indoor climate, especially in thermal terms. It must be cut with the hand-held circular saw. The Clayboard D 22 provides the walls with a wide drywall substructure grid of 625 mm. As supplement to this product sheet the CLAYTEC Guidelines for ecological drywalls in system apply.
Scope of application
Clayboards for cladding of wood and metal post structures in the interiors. For inner walls and facing shells DIN 4103-1, installation area 1 or 2 for ceiling and roof surfaces. On surfaces of water exposure class W0-I as per DIN 18534-1, e.g. in bathrooms (except for shower area) and household kitchens. For full-surface cladding of wood and chip boards. With reinforcing layer, substrate for YOSIMA clay designer plaster or CLAYTEC clay topcoat fine 06 with CLAYFIX clay paint.
Composition
Clay, earth, wood fibre, starch, jute fabric (one-side, back side).
Parameters
Surface hardness ≤ 15 mm, Bending tensile strength ≥ 0.8 N/mm2, Surface Tensile Strength ≥ 0.1 N/mm2. Bulk density class 1.6, bulk density approx. 1,450 kg/m3, thermal conductivity 0.353 W/mK, µ 5/10. Water vapour sorption class WS III. Heat storage: Cp 1.1 kJ/kgK, D22= 35.1 kJ/m2K, D16= 25.5 kJ/m2K. Construction material class A1.
Component values
For stability as per DIN 4103-1, sound insulation of walls and facing shells as well as building material class and fire resistance class for walls and ceilings, please refer to CLAYTEC Guidelines for ecological drywalls in the system.
Dimensions and weights
Dimensional stability class. MHK II, L = 1,250 mm (± 4 mm), W = 625 mm (± 4 mm), thickness = 22 mm or 16 mm (+ 1, - 3 mm). Evenness - 1 mm.
D22: Mass of approx. 25 kg/board = approx. 32 kg/m2
D16: Mass of approx. 18 kg/board = approx. 23 kg/m
06-2022
DIN 18945-47